Crossbow Building Wiki

Showing below up to 50 results in range #1 to #50.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

  1. (hist) ‎Test page ‎[97 bytes]
  2. (hist) ‎Hemp ‎[142 bytes]
  3. (hist) ‎Category hierarchy ‎[218 bytes]
  4. (hist) ‎Linen ‎[504 bytes]
  5. (hist) ‎Leather loop protection ‎[900 bytes]
  6. (hist) ‎Glassfiber as bow material ‎[1,021 bytes]
  7. (hist) ‎BambooLaminateBow ‎[1,033 bytes]
  8. (hist) ‎InternetResources ‎[1,211 bytes]
  9. (hist) ‎BuildingMaterials ‎[1,226 bytes]
  10. (hist) ‎Crossbow Building Wiki ‎[1,227 bytes]
  11. (hist) ‎Reinforcing trigger contact surface with high-carbon steel ‎[1,252 bytes]
  12. (hist) ‎Making wooden socket sidepieces ‎[1,328 bytes]
  13. (hist) ‎Making bow irons ‎[1,369 bytes]
  14. (hist) ‎Attaching socketed boltheads to the shaft ‎[1,421 bytes]
  15. (hist) ‎Heat treating steel ‎[1,444 bytes]
  16. (hist) ‎Making the guards, method 2 ‎[1,479 bytes]
  17. (hist) ‎Simple (no metal parts) crossbow design ‎[1,503 bytes]
  18. (hist) ‎Making bolt holders ‎[1,534 bytes]
  19. (hist) ‎Wooden fletching (method 1) ‎[1,590 bytes]
  20. (hist) ‎Making brass bolt holders for crossbows with nut and trigger locks ‎[1,625 bytes]
  21. (hist) ‎Drilling the nut socket ‎[1,799 bytes]
  22. (hist) ‎Nut with quick-locker pin ‎[1,848 bytes]
  23. (hist) ‎Designing simple thumb lever and string-catch crossbow locks ‎[1,884 bytes]
  24. (hist) ‎MakingMetalNockReinforcement ‎[2,003 bytes]
  25. (hist) ‎Basics of crossbow triggers ‎[2,192 bytes]
  26. (hist) ‎Making steel bolt holders for pin-trigger crossbows ‎[2,198 bytes]
  27. (hist) ‎Metal Vanes ‎[2,350 bytes]
  28. (hist) ‎Blunt boltheads from steel pipe ‎[2,492 bytes]
  29. (hist) ‎Making boltheads ‎[2,521 bytes]
  30. (hist) ‎Reinforced nut socket ‎[2,590 bytes]
  31. (hist) ‎Stiffening the middle of a leaf-spring bow ‎[2,609 bytes]
  32. (hist) ‎Making the stirrup ‎[2,769 bytes]
  33. (hist) ‎Making a serving tool ‎[2,824 bytes]
  34. (hist) ‎Plan for a simple leaf-spring prod ‎[3,284 bytes]
  35. (hist) ‎Steel as bow material ‎[3,409 bytes]
  36. (hist) ‎Wood as bow material ‎[3,413 bytes]
  37. (hist) ‎Making the guards and wedges ‎[3,667 bytes]
  38. (hist) ‎Measuring bow stretch and compression ‎[3,718 bytes]
  39. (hist) ‎Making fake nocks for use with fletching jigs ‎[3,847 bytes]
  40. (hist) ‎Forging boltheads, method 2 ‎[3,878 bytes]
  41. (hist) ‎Making a steel socket for the nut ‎[3,888 bytes]
  42. (hist) ‎Making a wippe ‎[3,956 bytes]
  43. (hist) ‎Metal fletching (method 2) ‎[3,990 bytes]
  44. (hist) ‎Traditional Finnish crossbow with steel bow ‎[4,094 bytes]
  45. (hist) ‎Making a steel prod from a leaf spring ‎[4,496 bytes]
  46. (hist) ‎Making a simple catch lock ‎[4,766 bytes]
  47. (hist) ‎Planing bolt shafts ‎[5,046 bytes]
  48. (hist) ‎Making simple bastard string fasteners ‎[5,419 bytes]
  49. (hist) ‎Designing simple lever and pin crossbow locks ‎[5,559 bytes]
  50. (hist) ‎Making the sideplates, method 2 ‎[5,593 bytes]

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)